• Locate the center of the picture frame on back surface at the top. With sawtooth notches pointing downward, tap the hanger onto frame with nails provided. Drive a nail into wall at desied height and place picture on nail in the appropriate notch.

• Packed in bulk, blister packaging, compartment box and polybag.

• Place hanger flat against wall (plaster, hardwood or tough lath). Insert nail through both holes and tap nail into wall with hammer.

• Mostly sold in American market.

• With nails or without nails (commom nails).

• Packed in bulk, blister packaging, compartment box and polybag.

• A kind of picture hangers.

• The nails with brass-made head.

• Mostly sold in European market.

• With nails or without nails.

• Packed in bulk, blister packaging, compartment box and polybag.

• A kind of picture hangers.

• Mostly sold in European market.

• With nails or without nails (commom nails).

• Packed in bulk, blister packaging, compartment box and polybag.

• A kind of picture hangers.

• The nails-concrete nails used on concrete and cinder block surfaces.

• With nails or without nails.

• Packed in bulk, blister packaging, compartment box and polybag.

• Hold hanger point against wall at an angle that will make disk parallel with wall. With a hammer, tap end of Easy Hanger until disk is flush with wall.

• Mostly sold in American market.

• Packed in bulk, blister packaging, compartment box and polybag.

• Ensure that surface is clean, dry and free from grease or dust. Mark exactly where the hook will be placed, as repositioning will cause the adhesive to weaken. Peel off the realease paper without touching the adhesive. Place in the required position and press firmly to ensure good contact. Leave in place for 12 hours before hanging item.

• Mostly sold in European market.

• Packed in bulk, blister packaging, compartment box and polybag.

• Ensure that surface is clean, dry and free from grease or dust. Mark exactly where the hook will be placed, as repositioning will cause the adhesive to weaken. Peel off the realease paper without touching the adhesive. Place in the required position and press firmly to ensure good contact. Leave in place for 12 hours before hanging item.

• Mostly sold in European market.

• Packed in bulk, blister packaging, compartment box and polybag.
]

• Ensure that surface is clean, dry and free from grease or dust.

• Mark exactly where the hook will be placed, as repositioning will cause the adhesive to weaken.

• Peel off the realease paper without touching the adhesive.

• Place in the required position and press firmly to ensure good contact.

• Leave in place for 12 hours before hanging item.

TYPE 2 (water glue):

• Moisten entire gummed surface thoroughly.

• Press firmly onto wall and let dry for 12 hours or more.

• Do not use where there is excessive humidity or steam.

• Do not use on acetate, vinyl, plastic or loose paint.

• To remove, wet entire surface with warm water and slowly pull hanger straight out from wall.

Mostly sold in American market.
Packed in bulk, blister packaging, compartment box and polybag.

• Made of Nylon with harden pins.

• Hard wall hangers are ideal for hanging pictures, utensils and tools on concrete and cinder block surfaces.

• Not suitable for wallboard, plaster, softwood, natural stone, hard brick, ceramic or formica surfaces.

• Packed in bulk, blister packaging, compartment box and polybag.

• Various Cup Hooks used to display your cup and mug sets. Available in various finishes.

• Mostly sold in American market.

• Packed in bulk, blister packaging, compartment box and polybag.

Unshouldered Cup Hooks:

• Various Cup Hooks used to display your cup and mug sets. Available in various finishes.

• Mostly sold in European market.

• Packed in bulk, blister packaging, compartment box and polybag.

• Safety cup hooks for use where motion or vibration might cause a hanging item to fall. Ideal for motor homes and travel trailers.

• Packed in bulk, blister packaging, compartment box and polybag.

• Cup Hooks used to display your cup and mug sets.

• Packed in bulk, blister packaging, compartment box and polybag.

• An all-purpose hook for heavier applications.

• Suggested uses: large kictchen utensils, heavier workshop items, clothsline or guy wire support, bar or rod support.

• Packed in bulk, blister packaging, compartment box and polybag.

We welcome you to advise us of your need anytime. You may contact us by e-mail or fax. For any question about screw eyes or other products. It would be our pleasure to serve you. Feel free to direct any inquiries or request for service at any time.

• To prevent unwanted openings of gates, doors, cabinets and shutters.

• Packed in bulk, blister packaging, compartment box and polybag.

• S-shaped metal hooks, good for hanging plants, and connecting lengths of chain. Available in different sizes and a variety of rust resistant metals, including brass, stainless steel, and zinc plated.

• Packed in bulk, blister packaging, compartment box and polybag.

• Drill small pilot hole for screw. Place offset end of holder over edge of mirror, insert screw secure to wall. For easier handling fasten holders along bottom edge first. Number of holders used should be according to size of mirror. Expansion wall fasteners are recommended for hollow walls and doors.

• Packed in bulk, blister packaging, compartment box and polybag.

• Suction Hangers clamp down to create a super-strong suction grip on almost any smooth, non-porous surface-window glass, mirrors, fiberglass, tile, or metal.

• Packed in bulk, blister packaging, compartment box and polybag.

• There are two types - swivel type and rigid type.

• Ring hangers (swivel type) consist of a movable decorative ring-shaped section attached to a screw-threaded base. Also known as "swivel hangers" the ring section of these hangers only pivot front-to-back (they do not swivel 360° around the screw).

• These small decorative hangers are most often used to suspend small picture frames or art objects either from a picture hook on the wall or from a cup hook or similar hook attached to the underside of a shelf, overhang or the like.

• Packed in bulk, blister packaging, compartment box and polybag.

• Place holder flat against backing or frame of mirror at each top corner.

• Nail (Screw) into place with loop turned up.

• Packed in bulk, blister packaging, compartment box and polybag.

• Plant swag hooks.

• For plaster and plaster board drill or punsh hole in ceiling to same diameter as the closed flaps of toggle. Insert flaps and bolt assembly with the toggle bolt protruding through. Lock the assembly by screwing on hook.

• For wood ceiling and beams, screw steel screw into hook. Then screw the assembly into the wood.

• Packed in bulk, blister packaging, compartment box and polybag.